Stain Out 1.2kg

Stain and mineral control. Granular sequestrant designed primarily for manganese, iron, copper staining and water discolouration.

Application

1. Adjust pH between 6.8 – 7.2 and let the chlorine level drop below 2 ppm.

2. For pool water discoloration, pour 150 g of STAIN OUT per 10,000 L directly over the swimming pool surface. For stain removal, proceed to # 3.

3. Brush affected areas.

4. Add 150 g of STAIN OUT per 10,000 L of pool water to a pail of water and apply the concentrated solution along the pool walls and/or in areas where staining is present. Where stains are most prevalent directly brush with the product.

5. Severe staining of surfaces may require up to 300 g of STAIN OUT per 10,000 L of swimming pool water.

6. Allow the circulation system to run continuously for 24 hours.

7. After 24 hours, adjust pH between 7.2 – 7.8 and alkalinity between 80 – 120 ppm.

8. Do not superchlorinate water for at least 72 hours.

9. Continue to use STAIN OUT on a weekly basis to prevent the reoccurrence of staining of swimming pool surfaces or water discoloration.