Visit our showroom

Cell Saver

Description

Formulated for cleaning salt generator cells without causing any harm to the cell plates. Will restore conductivity and effiency by eliminating scale build-up.

Application

1. Remove the cell according to the manufacturer’s instructions.

2. Rinse the cell to remove excess debris.

3. Place the cell upright into a pail, covered with the SALT CELL SAVER solution. Allow to soak for a minimum of 20 to 30 minutes, then remove cartridge from the solution.

4. Rinse cartridge immediately with fresh water.

5. Re-install the cell according to the manufacturer’s instructions.

 

Contact us if you have any questions

[shareaholic app="share_buttons" id="7335516"]